High-purity Fine Quartz Powder for Ceramics is processed from selected high-grade natural quartz ore through precision crushing, wet/dry grinding, and advanced air classification. Engineered for ceramic bodies, glazes, and technical ceramics, it acts as a stable skeleton mineral that controls drying shrinkage, thermal expansion, and vitrification behavior during high-temperature firing. Controlled iron content and narrow particle size distribution ensure predictable firing results, whiteness stability, and defect-free glazed surfaces.
Key Features
Low Iron Content (Fe₂O₃): Strict raw material selection and multi-stage magnetic separation minimize iron contamination, preventing yellowing, black spots, or discoloration in fired ceramic bodies and glazes.
Precise Particle Size Distribution: Air-classifier milling yields a steep particle size curve (D₅₀ and D₉₀ controlled), ensuring uniform packing density and predictable rheological behavior in slips and slurries.
High Chemical Purity: Minimum SiO₂ content of 99.2%+, minimizing fluxing impurities (like alkalis) that can prematurely alter high-temperature pyrochemical reactions.
Batch-to-Batch Consistency: Automated milling and rigorous multi-stage sampling protocols maintain physical and chemical stability across bulk shipments, reducing formulation adjustments in production lines.
Good Dispersion: Low agglomeration tendency ensures smooth integration into aqueous suspensions, binders, and dry-pressed ceramic powders.
Technical Specifications
|
Parameter |
Typical Value |
Test Method / Standard |
|
Chemical Composition (SiO₂) |
≥ 99.2% |
X-Ray Fluorescence (XRF) |
|
Iron Oxide (Fe₂O₃) |
≤ 0.05% - 0.08% |
XRF / Atomic Absorption |
|
Particle Size (D₅₀) |
Custom (e.g., 5 μm - 45 μm) |
Laser Diffraction Particle Size Analyzer |
|
Particle Size (D₉₀) |
≤ 45 μm (or per spec) |
Laser Diffraction Particle Size Analyzer |
|
Moisture Content |
≤ 0.2% |
Gravimetric Analysis (105°C) |
|
Whiteness |
≥ 90 - 93 |
Hunter Whiteness Meter |
|
Residue (325 mesh / 45 μm) |
≤ 0.05% |
Wet Sieve Analysis |
Applications
Ceramic Body Formulations: Used as a non-plastic skeleton filler in wall/floor tile bodies and sanitaryware to reduce drying shrinkage and stabilize the quartz inversion phase during firing.
Glazes & Frits: Serves as a primary silica source in transparent and opaque glazes, adjusting thermal expansion coefficients to prevent crazing or shivering on glazed surfaces.
Technical & Electronic Ceramics: Utilized as a high-purity structural filler where precise mineral composition and low impurity levels are mandatory.
Refractories: Incorporated into silica-based refractory mixes for thermal shock resistance and high-temperature volume stability.
Quality Control & Manufacturing Capability
Our manufacturing facility operates integrated processing lines including primary jaw crushing, rod/ball milling, high-intensity magnetic separation, and high-efficiency air classification.
Raw Material Inspection: Ore batches are tested via XRF before entering production to screen out variable mineral veins.
In-Process Monitoring: Laser particle size analyzers test output streams every 2 hours to ensure strict adherence to D₅₀ tolerances.
Traceability: Every pallet and ton bag carries a unique lot number linked to a retained laboratory sample stored for 12 months.
Documentation: Each shipment is accompanied by a Certificate of Analysis (COA) detailing actual SiO₂, Fe₂O₃, moisture, and particle size distribution.
Packaging & Supply
Standard Packaging: 25 kg moisture-proof PE-lined kraft paper bags, or 1-metric-ton jumbo bags (PP woven with inner liner). Palletized and stretch-wrapped for container transport.
Customization: Custom particle size cuts (D₅₀ ranging from ultra-fine micronized grades to coarse foundry cuts) engineered upon request.
Sampling: 1 kg laboratory samples available upon request for formulation trials and pilot testing.
Supply Capacity: Stable monthly output backed by dedicated warehouse stock of standard grades, ensuring consistent supply for annual contracts.
Frequently Asked Questions
Q: How does your quartz powder control iron contamination during processing?
A: We utilize multi-stage rare-earth roller magnetic separators integrated directly into our milling and air-classification lines to remove ferromagnetic impurities down to trace levels (≤ 0.05%).
Q: Can you adjust the D₅₀ particle size to match our specific rheological requirements?
A: Yes. By adjusting our closed-circuit air classifier parameters, we can tailor the D₅₀ and top-cut (D₉₀) to fit your specific slip viscosity or dry-pressing granule specs.
Q: Do you provide a Certificate of Analysis (COA) with every shipment?
A: Yes. Every batch undergoes pre-shipment laboratory testing, and a dedicated COA showing actual SiO₂, Fe₂O₃, and particle size data is dispatched with the paperwork.
Q: What is the standard minimum order quantity (MOQ) for custom particle size grades?
A: The standard MOQ for trial orders is 1 metric ton (1 pallet), allowing your engineering team to conduct full-scale plant trials.
Q: How is moisture content kept below 0.2% during ocean shipping?
A: Our products are packed in moisture-resistant valve bags or lined jumbo bags, loaded into dry containers, and can be shrink-wrapped with hood PE films for maritime transit protection.
Q: What documentation is required to request industrial testing samples?
A: Please provide your company name, target application (e.g., sanitaryware glaze or tile body), target particle size, and delivery address via our RFQ form below.
Request a Quote
To receive a precise technical proposal, product specification sheet, and commercial quotation tailored to your operation, please submit your requirements:
Target Particle Size (D₅₀ / D₉₀):
Required Chemical Specification (SiO₂ / Fe₂O₃ limits):
Estimated Monthly / Annual Consumption:
Application Scenario: (e.g., tile body, sanitaryware glaze, technical ceramic)
Destination Port / Delivery Location:
[ Submit RFQ / Contact Technical Sales ] (Button)
Hot Tags: fine quartz powder for ceramics, China fine quartz powder for ceramics manufacturers, suppliers, factory


