Product Overview
High-purity crystalline and ground silica extenders engineered for high-durability industrial coatings, epoxy systems, architectural paints, and powder coatings.
Silica powder (Ground Quartz / Silica Flour) serves as a functional extender pigment in high-performance coating formulations. Produced from high-purity natural quartz feedstock using iron-free ceramic ball milling and closed-loop air classification, this material provides mechanical reinforcement, chemical resistance, gloss control, and anti-settling performance.
Primary Function: Viscosity control, mechanical wear resistance, barrier improvement, and resin extension.
Chemical Base: Natural Crystalline Silicon Dioxide (SiO₂ ≥ 99.3%).
CAS Number: 14808-60-7.
Mesh Range: 325 Mesh to 1250 Mesh (D₅₀: 2.5 μm - 15 μm).
-
Silica Powder For High-Filler CoatingsThis crystalline/fused silica powder is engineered specifically for high-filler coating systems, including epoxy primers, heavy-duty anti-corrosion paints, and industrial floorings. It functions as a
-
Quartz Powder For Protective CoatingsHigh-purity quartz powder engineered specifically as a functional mineral filler for protective coatings, industrial paints, and heavy-duty anti-corrosion systems. Processed from selected high-grade
-
Silica Filler For Epoxy CoatingsEngineered for industrial epoxy formulations, this high-purity silica filler functions as a key extender and reinforcing agent to optimize mechanical strength, dimensional stability, and chemical
-
Silica Filler For Powder CoatingsThis functional silica filler is engineered specifically for thermosetting and thermoplastic powder coating formulations. Processed from high-purity quartz/fused silica via precision grinding and
-
Quartz Powder For Industrial CoatingsOur industrial-grade quartz powder is engineered for coating manufacturers requiring high mineral purity, controlled particle size distribution, and strict batch consistency. Produced from selected
-
Fine Silica Powder For CoatingsFine Silica Powder is processed from high-purity crystalline quartz via precision grinding and air-classifying. Engineered specifically for paint and coating systems, it functions as a
Controlled Iron Content (Fe₂O₃ ≤ 0.03%):
Milled exclusively with high-density alumina ceramic media and processed through 12,000-Gauss magnetic separators to prevent resin yellowing or color drift (ΔE) in clear coats and white formulations.
Narrow Particle Size Distribution (PSD):
Air-classified with strict top-cut control (D₉₇), eliminating coarse particles (>45 μm wet sieve residue <0.01%) to prevent surface scratches during drawdowns.
Low Oil Absorption (18–24 g/100g):
Minimizes resin demand, enabling high-solids content in solvent-borne and epoxy systems without unwanted viscosity spikes.
Chemical Inertness & Weatherability:
Resistant to acid, alkali, and thermal shock; significantly improves barrier properties against moisture penetration and salt spray corrosion.
Batch-to-Batch Consistency:
Monitored via in-line laser diffraction analyzers (Malvern Mastersizer) to guarantee consistent viscosity, gloss level, and settling behavior across all delivery lots.
Technical Specifications
Note: The values below represent standard production grades. Customized particle size distribution (D₅₀ / D₉₇) can be produced upon technical evaluation.
|
Parameter |
Grade SP-325 |
Grade SP-600 |
Grade SP-1250 |
Test Standard |
|
SiO₂ Content |
≥ 99.3% |
≥ 99.5% |
≥ 99.5% |
XRF / ISO 3262-13 |
|
Fe₂O₃ Content |
≤ 0.03% |
≤ 0.025% |
≤ 0.02% |
Photometric / ISO 3262 |
|
Median Particle Size (D₅₀) |
12.0 - 15.0 μm |
5.0 - 7.0 μm |
2.5 - 3.5 μm |
Laser Diffraction (ISO 13320) |
|
Top Cut (D₉₇) |
≤ 45 μm |
≤ 22 μm |
≤ 10 μm |
Laser Diffraction |
|
Sieve Residue (45 μm / 325 mesh) |
≤ 0.05% |
≤ 0.005% |
0.00% |
ISO 787-18 (Wet Sieve) |
|
Whiteness (L*) |
≥ 93.0 |
≥ 94.5 |
≥ 95.5 |
Spectrophotometer (D65) |
|
Oil Absorption (Linseed Oil) |
18 - 20 g/100g |
20 - 22 g/100g |
22 - 25 g/100g |
ISO 787-5 |
|
Moisture Content (105°C) |
≤ 0.15% |
≤ 0.15% |
≤ 0.20% |
ISO 787-2 |
|
pH Value (10% aqueous slurry) |
6.5 - 7.5 |
6.5 - 7.5 |
6.5 - 7.5 |
ISO 787-9 |
|
Specific Gravity |
2.65 g/cm³ |
2.65 g/cm³ |
2.65 g/cm³ |
Pycnometer |
Applications
Industrial Anti-Corrosion & Epoxy Coatings:
Increases packed density within epoxy matrixes, improving water permeability resistance and salt spray protection. Grade SP-325 and SP-600 maintain flowability while improving scrub resistance in heavy-duty marine and infrastructure primers.
Flooring & High-Wear Coatings:
Serves as an abrasive-resistant filler in polyurethane and epoxy floor screeds. The high mineral hardness (Mohs 7) enhances scratch and abrasive resistance, while its low oil absorption allows for high filler loading without compromising workable viscosity.


Architectural Paints & Satin / Matte Finishes:
Grades SP-600 and SP-1250 provide predictable gloss reduction (sheen control) in exterior masonry coatings and interior wall paints, improving burnish resistance and wet scrub durability.
Powder Coatings:
Used as a functional extender in polyester/epoxy powder coatings to regulate edge coverage, surface hardness, and transfer efficiency during electrostatic spraying.
Quality Control & Manufacturing Operations
Our dedicated silica processing facility operates four continuous air-classification loops powered by high-purity quartz reserves.
Raw Quartz Selection → Washing & Optical Sorting → Ceramic Ball Milling → Air Classification → Magnetic Separation → Packaging & Lab Release
Zero-Metallic Contamination Line:
Milling circuits use high-density alumina lining blocks and ceramic grinding balls to eliminate iron contamination during ultrafine grinding.
In-Line Quality Verification:
Every 2-hour production interval includes sample testing for PSD (D₁₀, D₅₀, D₉₇), 45 μm wet residue, and whiteness.
Documented Compliance:
Every delivered batch is backed by a lot-specific Certificate of Analysis (COA) generated by our ISO 17025-compliant laboratory. Safety Data Sheets (SDS) comply with REACH and OSHA GHS standards.
Packaging, Handling & Supply Chain
Standard Packaging: 25 kg multi-wall paper bags with PE inner liner (1,000 kg per stretch-wrapped, heat-treated wooden pallet).
Bulk Packaging: 1,000 kg or 1,200 kg woven polypropylene FIBC (Big Bags) equipped with discharge spouts and inner moisture barriers.
Custom Grain Sizes: Particle size distributions can be customized (D₅₀ from 2 μm to 25 μm) upon technical review.
Sample Availability: 1 kg – 5 kg lab sampling kits are available via DHL/FedEx with lot COA included for trial evaluation.
Supply Capacity: Monthly output capacity exceeds 6,000 metric tons with export loading directly into 20ft dry containers (20–25 MT per container).
Safe Handling Notice: Standard industrial dust control and personal protective equipment (PPE) should be utilized during unbagging and mixing operations. Full hazard evaluation and handling guidance are available in our OSHA/REACH-compliant SDS.
Frequently Asked Questions

Request a Quote & Technical Support
To receive a formal quotation, product samples, or customized formulation support, please complete the technical inquiry form below:
Target Grade / Mesh / D₅₀: [ e.g., SP-600 / D₅₀ 5-7 μm ]
Technical Specifications Needed: [ e.g., Fe₂O₃ < 0.025%, Whiteness > 94 ]
Application & Resin System: [ e.g., 2K Solvent-borne Epoxy Primer ]
Estimated Monthly / Annual Consumption: [ e.g., 20 MT / Month ]
Destination Port / Incoterms: [ e.g., CIF Hamburg / FOB Qingdao ]
Sample Request:
[ ] Request 2 kg Free Sample Kit (Shipped via Air Express)
[ ] Technical Data Sheet (TDS) & SDS Only
We're well-known as one of the leading silica powder for coatings & paints manufacturers and suppliers in China. Welcome to buy high quality silica powder for coatings & paints made in China here and get free sample from our factory. For price consultation, contact us.

