Low-Iron Silica Filler For Ceramics

Low-Iron Silica Filler For Ceramics
Details:
Low-Iron Silica Filler is a high-purity functional mineral powder processed from selected quartz feedstock via precision crushing, optical color sorting, multi-stage magnetic separation, and closed-circuit air classification.
Send Inquiry
Description
Send Inquiry

Low-Iron Silica Filler is a high-purity functional mineral powder processed from selected quartz feedstock via precision crushing, optical color sorting, multi-stage magnetic separation, and closed-circuit air classification.


Engineered specifically for ceramic bodies, sanitaryware, and glaze formulations, it provides a stable, non-plastic silica skeleton while maintaining chromophoric impurities-particularly iron oxide-at ultra-low levels. This ensures superior fired whiteness, high thermal stability, and tight dimensional tolerance across modern industrial kiln cycles.

 

Key Technical Advantages


Ultra-Low Iron Content (Fe₂O₃ ≤ 0.03%): Restricts fluxing impurities to prevent high-temperature discoloration, dark speckling, or yellow undertones in white porcelain bodies and transparent glazes.


Controlled Particle Size Distribution (PSD): Processed via closed-circuit air-classifier mills, ensuring tight D₅₀ and D₉₀ limits for optimal particle packing density, green body strength, and stable firing shrinkage.


High Chemical Purity (SiO₂ ≥ 99.20%): Minimizes uncontrolled eutectic melting and phase changes caused by stray alkaline earth or transition metal contaminants.


Batch-to-Batch Consistency: Multi-stage high-intensity magnetic separation (>12,000 Gauss) and continuous inline sampling stabilize physical and chemical parameters across multi-ton shipments.


Optimized Slurry Rheology: Clean surface morphology and minimal ultrafine dust prevent agglomeration and viscosity spikes during wet milling and slip casting.

 

Technical Specifications

 

Parameter

Typical Value

Specification Limit

Test Standard / Method

Silicon Dioxide (SiO₂)

99.35%

≥ 99.20%

X-ray Fluorescence (XRF) / ISO 3262

Iron Oxide (Fe₂O₃)

0.022%

≤ 0.030%

ICP-OES / AAS

Aluminum Oxide (Al₂O₃)

0.25%

≤ 0.40%

X-ray Fluorescence (XRF)

Median Particle Size (D₅₀)

15.5 μm

5.0–45.0 μm (Customizable)

Laser Diffraction (Malvern) / ISO 13320

Top Cut Size (D₉₀)

42.0 μm

≤ 45.0 μm

Laser Diffraction (Malvern) / ISO 13320

Moisture Content

0.12%

≤ 0.20%

105°C Gravimetric / ASTM C566

Fired Whiteness (L Value)*

93.2

≥ 92.0 (1200°C, Oxidizing, 30 min)

Spectrophotometer / CIE Lab*

325 Mesh Wet Residue

0.02%

≤ 0.05%

Wet Sieve Analysis / ASTM C325

 

Application Areas


Porcelain Tableware & Sanitaryware: Serves as a pure refractory skeleton in high-end bodies, reducing thermal deformation, sagging, and firing cracks during high-temperature cycles.


Ceramic Glazes & Opaque Engobes: Applied in clear, gloss, and matte glaze formulations where zero color distortion is required to maintain true optical clarity and high gloss values.


Technical & Electronic Ceramics: Used as a high-purity silica source for alumina/steatite substrates, investment casting shell wash, and refractory kiln components.


Polymer & Resin Composites: Functions as an acid-resistant filler in epoxy casting, liquid silicone rubber, and engineered stone requiring low thermal expansion.

 

Quality Control & Manufacturing Rigor


Raw Ore Beneficiation: Raw quartz undergoes automated optical sorting, high-pressure water washing, and mechanical scrubbing to strip surface oxides prior to grinding.


Inline Magnetic Purification: Closed-circuit grinding systems integrate multi-stage rare-earth permanent magnetic separators (>12,000 Gauss) to strip microscopic iron particles.


Shift Laboratory Testing & ISO Standards: Every 4-hour production batch is verified via XRF spectroscopy for elemental composition and laser diffraction for particle grading in accordance with ISO 3262 and ASTM testing procedures.


Lot Traceability & Documentation: Every shipment is dispatched with a Lot-Specific Certificate of Analysis (COA). Retention samples from all batches are stored for 12 months for full traceability.

 

Packaging & Ocean Freight Logistics


Packaging Specifications:
25 kg Bags:
Multi-wall paper-plastic bags with inner PE liners, stack-palletized and stretch-wrapped (1,000 kg / pallet).


Bulk Jumbo Bags: 1,000 kg or 1,250 kg heavy-duty FIBC bulk bags with inner polyethylene moisture barriers.


Production & Supply Capacity: 5,000 Metric Tons / Month stable output with automated palletizing and indoor dry warehousing.


Ocean Freight Capacity: 24–25 Metric Tons per 20' GP container (Full Container Load / FCL).


Sample Fulfillment: 1 kg to 5 kg evaluation samples prepared with full analytical COA and shipped via DHL/FedEx within 48 hours.

 

Frequently Asked Questions

 

Q: How does maintaining Fe₂O₃ ≤ 0.03% impact high-temperature ceramic firing?

A: Iron oxide acts as an active flux and colorant above 1150°C. Restricting Fe₂O₃ to ≤ 0.03% eliminates unwanted amber/yellow undertones, localized dark speckling, and uncontrolled glass phase viscosity during firing.

Q: Can you tailor the D₅₀ particle size to reduce our internal ball-milling time?

A: Yes. By adjusting our air classification parameters, we can deliver pre-milled silica with target D₅₀ values (5 μm to 45 μm), allowing ceramic plants to shorten wet ball-milling cycles or direct-mix in dry processes.

Q: What analytical documentation accompanies commercial shipments?

A: Every commercial shipment includes a Lot-Specific Certificate of Analysis (COA) detailing tested SiO₂, Fe₂O₃, moisture, and particle size distribution. SDS and REACH compliance declarations are available on request.

Q: What is the Minimum Order Quantity (MOQ) for commercial orders?

A: The standard ocean freight MOQ is one 20' GP container (approx. 24–25 MT). Smaller palletized trial shipments can be arranged for full-scale plant trials.

Q: How do you prevent moisture absorption during long-distance ocean transit?

A: All bags feature sealed polyethylene (PE) inner liners and are palletized with heavy plastic stretch-wrap and edge protection to prevent atmospheric humidity and dust contamination during ocean transit.

Q: What is the procedure for requesting a trial sample?

A: Fill out the RFQ form below specifying your target mesh size, application, and destination. Our technical team will dispatch a tested sample lot within 48 hours.

 

Request a Quote & Technical Consultation


Submit your technical parameters below to receive a matched product recommendation, full Technical Data Sheet (TDS), and commercial quotation within 24 hours:


Target Application: (e.g., Sanitaryware glaze, porcelain tile body, technical ceramic)


Target Particle Size / Mesh: (e.g., D₅₀ = 15 μm, 325 mesh, 500 mesh)


Maximum Allowable Fe₂O₃: (e.g., ≤ 0.03% or custom limit)


Estimated Volume: (e.g., 25 MT trial shipment, 200 MT/month annual supply)


Destination Port: (For CIF / CFR freight estimation)

Hot Tags: low-iron silica filler for ceramics, China low-iron silica filler for ceramics manufacturers, suppliers, factory

Send Inquiry