Fused silica micropowder (Fused Silica Micropowder) is an amorphous silica micropowder material formed from high-purity quartz, melted at high temperatures and then rapidly cooled. Its unique production process imparts excellent physical and chemical properties, making it irreplaceable in applications such as electronic packaging, refractory materials, precision ceramics, and optical coatings.
Core Production Process and Structural Characteristics
The production of fused silica micropowder involves completely melting natural quartz sand or synthetic quartz in an electric arc furnace at 1700-2100°C. It is then amorphized by high-pressure gas injection or water quenching. This process eliminates the directional structure of crystalline silicon, forming a dense glassy network. This results in an extremely low coefficient of expansion (0.5×10⁻⁶/°C) and excellent thermal stability. The typical particle size range is 0.1-100μm. Particle size distribution can be further controlled through airflow milling or ball milling. The median diameter (D50) is typically controlled within the 1-10μm range to meet different application requirements.
Key Performance Advantages
1.High Purity: Metal impurity levels are typically less than 30ppm, and silica purity is ≥99.9%. Some high-end products can reach over 99.99%, effectively preventing ion migration contamination in electronic devices.
2.Excellent Dielectric Properties: Volume resistivity >10¹⁸Ω·cm, and a dielectric constant (2.2-2.4 @ 1MHz) approaching vacuum levels, making it suitable for high-frequency circuit substrate filling.
3.Thermodynamic Stability: Maintains structural integrity at 1000°C, with a thermal conductivity of only 1.3-1.5 W/(m·K), providing a balanced thermal insulation and heat dissipation profile.
4.Surface Chemical Properties: The hydroxyl content is controllable (0.1-1.0%), and compatibility with organic matrices can be enhanced through surface modification (such as silane coupling agent treatment).
Typical Applications
In the copper-clad laminate industry, fused silica powder as a filler can increase the CTI (Comparative Tracking Index) of the laminate to over 600V, while also reducing the coefficient of thermal expansion to match chip packaging requirements. In the photovoltaic field, it is used as a coating material for quartz crucibles, effectively reducing corrosion caused by molten silicon. In the specialty ceramics field, a 60% addition can increase the flexural strength of Al₂O₃-based ceramics to over 450 MPa. Furthermore, its nano-dispersion system exhibits unique optical scattering properties in photoresist masks and laser protective films.
Quality Control Standards
International standards ISO 9286 and GB/T 12444 specify particle size analysis methods and chemical composition testing procedures for silica powder, respectively. High-quality products must meet the following requirements: Fe₂O₃ <10ppm, Al₂O₃ <50ppm, Cl⁻ ≤5ppm, and must pass a 28-day high-temperature storage test to verify moisture absorption (should be <0.3%).
With the development of 5G communications and third-generation semiconductor technologies, higher requirements are being placed on the sphericity (true sphericity >0.9), ultrafine particle size (D50 <1μm), and functional modification of fused silica micropowder. In the future, this material will continue to evolve towards low radioactivity (U/Th content <0.1ppb) and high thermal conductivity composites, continuously supporting technological upgrades in high-end manufacturing.

